Polyurethane roof coatings offer tenacious adhesion on difficult to adhere substrates. They make an excellent base coat for our silicone roof coatings.
Solvent-based, moisture-cure polyurethane roof coating is an excellent base coat for our silicone coatings.
Breathe new life into aged flat roofs such as built up, modified bitumen and single ply membranes (EPDM or TPO). If your budget is tight, consider applying just 1 coat of EnergyGuard Aromatic Polyurethane then apply the finish coat when you are ready. EnergyGuard Aromatic Polyurethane is both a base coat and finish coat and this means it can be left exposed for years.
Most emergency roof repairs are temporary and it doesn’t have to be. EnergyGuard Aromatic Polyurethane Coating has excellent adhesion on most roof types and it can stay exposed for years until you are ready to restore your roof.
Silicone coatings are easy to apply with sprayers, and spreaders. They clean up with mineral spirits and should not be applied when when relative humidity is low or if temperatures are below 45°F and falling.
Although not all fields are mandatory, it would be helpful if you could provide as much information as possible about your roof.