PrimeLock Bonding Primer SDS

Safety Data Sheet

I. IDENTIFICATION

  • PRODUCT IDENTIFICATION
  • PrimeLock Bonding Primer
  • Packaging: buckets
  • Chemical Name: Acrylic Primer
  • CAS Number: Mixture
  • DATE UPDATED: Thursday, May 10, 2018
  • EMERGENCY TELEPHONE NUMBER: INFOTRAC 800-535-5053
COMPANY INFORMATION

II.  COMPOSITIONS / INFORMATION ON INGREDIENTS

No toxic chemicals subject to the reporting requirements Title III Section 313 or of 40 FR 372 are present.

III. HAZARDS IDENTIFICATION

Effects of overexposure

  • INHALATION: Spray mist in poorly ventilated areas can cause headache, nausea and irritation of the nose, throat, and lungs.
  • EYE: Direct contact may cause irritation.
  • SKIN: May cause moderate skin irritation with repeated contact.

IV. FIRST AID MEASURES

  • INHALATION: Move subject to fresh air.
  • EYE CONTACT: Flush eyes for at least 15 minutes. Get medical attention if irritation develops or persists.
  • SKIN CONTACT:  Wash affected area with large amounts of soap and water.
  • INGESTION:  If swallowed give two glasses of water to drink. Consult a physician. Never give anything by mouth to an unconscious person.

V. FIRE FIGHTING MEASURES

  • FLASH POINT:  Not Applicable.
  • AUTOIGNITION TEMPERATURE:  Not Applicable.
  • LEL:  Not Applicable.
  • UEL:  Not Applicable.
  • FLAMMABLE LIMITS: Not Applicable.
  • EXTINGUISHING MEDIA:  Not Applicable.
  • FIRE-FIGHTING EQUIPMENT:  Wear SCBA and full protective gear when entering a confined or enclosed space to protect from normal combustion products and/or oxygen deficiency.
  • UNUSUAL FIRE OR EXPLOSION HAZARDS:  Containers may develop pressure if temperature exceeds boiling point.

VI. ACCIDENTAL RELEASE MEASURES

  • SPILLS/LEAK PROCEDURE: Keep spectators away as the floor may be slippery. Use care to avoid falling. Keep spills out of municipal sewers and open bodies of water. Remove with absorbent material for small spills. For large spills, ventilate enclosed areas or wear self-contained breathing apparatus. Recover free liquid in closed containers. Clean area with absorbent material.
  • DISPOSAL: Disposal should be in accordance with local, state, and federal regulations.

VII. HANDLING AND STORAGE

  • HANDLING PRECAUTIONS:  Keep from Freezing
  • STORAGE REQUIREMENTS:  Recommended storage range is 45–90°F. Keep container tightly closed.

VIII. EXPOSURE CONTROLS / PERSONAL PROTECTION

  • VENTILATION:  Use adequate ventilation to keep concentration of vapors below exposure limits.
  • RESPIRATORY REQUIREMENTS: Wear suitable respirator (MSHA/NIOSH approved or equivalent) where exposure limits are exceeded in confined spaces or poorly ventilated areas.
  • PROTECTIVE EQUIPMENT: Impervious Gloves
  • EYE PROTECTION:  Chemical splash goggles (ANSI Z-87.1 or approved equivalent).

IX. PHYSICAL AND CHEMICAL PROPERTIES

  • Physical State: Viscous Liquid
  • Appearance:  Blue
  • Vapor Pressre:  >1
  • Density:  8.2-8.6 lbs/gal
  • Water Solubility:  Dispersible
  • % Volatile by Weight:  50-54%
  • Boiling Point: 212°F
  • Freezing Point:  32°F
  • Viscosity:  600 - 800 cps
  • Evaporation Rate:  <1
  • Volatile Organic Compounds:  None

X. STABILITY AND REACTIVITY

  • STABILITY:  Stable.
  • INCOMPATIBILITY:   No known incompatible materials are know for this product.
  • HAZARDOUSE POLYMERIZATION:  Will not polymerize.
  • HAZARDOUS DECOMPOSITION:  Not applicable.

XI. TOXICOLOGICAL INFORMATION

  • No information available.

XII.  ECOLOGICAL INFORMATION

  • No information available.

XIII. DISPOSAL CONSIDERATIONS

  • WASTE DISPOSAL: Treat or dispose of waste material in accordance with all local, state/provincial, and national requirements.

XIV. TRANSPORTATION INFORMATION

  • PRODUCT LABEL: PrimeLock Bonding Primer
  • D.O.T. SHIPPING NAME: N/A
  • D.O.T. HAZARD CLASS: Non-Hazardous

XV. REGULATORY INFORMATION

  • EPA Regulations: All components of this product are believed to be in compliance with the inventory listing requirements of the US Toxic Substances Control Act (TSCA) Chemical Substances Inventory. 

XVI. OTHER INFORMATION

The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.