A badly degraded spray foam roof in the Philippines. When you skip inspection and maintenance, it becomes very costly to fix. Don't delay.
Spray foam roofs are usually coated with acrylic or silicone roof coatings upon installation to protect it from UV degradation.
Spray polyurethane foam in good condition has a pale yellow color. Once it has turned orange, degradation has occurred and the foam may need to be scarified and resprayed by professional spray foam contractor.
EnergyGuard Aromatic Polyurethane is a high VOC product and cannot be shipped to California. Use PrimeLock Epoxy Primer and EnergyMax Silicone Coating instead.
|Previously Coated with Acrylic||Recoat with Acrylic or Silicone|
|Previously Coated with Silicone||Recoat with Silicone Only|
Longevity of a roof coating system depends on the coating chemistry, installation integrity and maintenance. All our 30 dry mil systems are eligible for a 10 year warranty when installed by an approved contractor. We can do this because we are confident that it will last longer than that.
It depends on the size and condition of your roof. A small, simple roof may qualify as a weekend job for a building owner. A large roof that leaks and needs repairs should definitely be restored by a roof coating contractor.
Water-based, acrylic roof coating with 315% elongation and 60% solids. Use on positively sloped roofs that don't pond water such as metal roofs.
ASTM D-6083, water-based, acrylic roof coating with 400% elongation and 55% solids. Use on positively sloped roofs that don't pond water such as metal roofs.
Solvent-based, silicone roof coating with 267% elongation and 69% solids. Stands up to permanent ponding water conditions.
Solvent-based, silicone roof coating with 190% elongation and 97% solids. Stands up to long-term ponding water conditions. California VOC Compliant.
This 15,000SF concrete roof deck was recoated with EnergyMax Silicone Coating.
Badly deteriorated EPDM roof was leaking everywhere. They were able to fix all the leaks with just one coat of EnergyGuard Aromatic Polyurethane.
Buffalo's Cafe in Canton, GA had minor recurring leaks. EnergyGuard Aromatic Polyurethane was used as a metal roof sealant to seal the horizontal seams and around the HVAC units.
18-year-old, Duro-Last single-ply roof which was leaking at seams. A cost-effective alternative to roof replacement is needed. Lexis delivers.
A 57,000sf metal building in Gainesville, Florida with a trapezoidal standing seam metal roof. Lexis roof coatings stopped the roof leaks throughout the building.
This newly constructed 18,800sf building at the Andersen AFB in Guam has a concrete roof primed with PrimeLock Epoxy Primer and coated with 45 dry mils of EnergyMax Silicone Coating to keep it cool and leak-free.