- EnergyMax Eco-Silicone
- Packaging: Pail
- CAS Number:
- Date Updated: Thursday, May 10, 2018
- EMERGENCY TELEPHONE NUMBER: CHEMTREC: 800-424-9300
II. HAZARDS(S) IDENTIFICATION CAUTIONProlonged or repeated contact may cause skin or eye irritation. May be harmful if swallowed.HMIS RatingHealth: 2
Personal Protection Index: XEYE:Contact may cause eye irritation.SKIN:Can cause moderate skin irritation.INHALATIONAvoid breathing vapors or mists. Prolonged or excessive inhalation may cause respiratory tract irritation. May cause allergic respiratory reaction.INGESTIONHarmful if swallowed. Can burn mouth, throat and stomach.CHRONIC EFFECTSSensitized (allergic) individuals may show allergenic lung and/or skin reaction. After an individual is diagnosed as sensitive to isocyanates, no exposure should be permitted. Chronic effects of overexposure to xylene may include kidney or liver damage.REPRODUCTIVE HAZARDSExposure to Xylene may damage developing fetus.CARCINOGENICITY INFORMATIONNo known cancer hazards.MEDICAL CONDITIONS AGGRAVATED BY EXPOSUREAsthma-like conditions may cause additional breathing problem.
III. COMPOSITION / INFORMATION ON INGREDIENTS
|Chemical Name||Vapor Pressure||CAS Number||Weight|
OSHA PEL:TWA 0.1 mg/M3 (as respirable dust only)
ACGHI PEL: TWA 0.1 mg/M3 (as respirable dust only)
IV. FIRST-AID MEASURES GENERALIn case of accident or if you feel unwell, seek medical advice IMMEDIATELY.EYE CONTACTAfter initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Hold eyelids apart to ensure rinsing of the entire surface of the eye and lids with water. Get medical attention if irritation develops or persists.SKIN CONTACTRemove contaminated clothing and shoes. Wash affected area immediately with large amounts of soap and water. Get medical attention if irritation develops or persists.INHALATIONIf inhaled, remove to fresh air. If not breathing, give artificial respiration. Get medical attention if cough or other symptoms develop.INGESTION
Get immediate medical attention. Do not induce vomiting. Contact a physician. Never give anything by mouth to an unconscious person. If unconscious, treat for shock. Notify a physician or the nearest poison control center immediately. If conscious, have the person rinse his mouth with cold water. If unconscious and vomiting, turn the person to his side to avoid choking.
V. FIRE-FIGHTING MEASURES FLAMMABLE PROPERTIESFlash Point: >290°FAuto Ignition Temperature: Not EstablishedFLAMMABLE LIMITS IN AIRLEL: N/AUEL: N/ASensitivity to Static Discharge: N/ACombustion Products: Carbon monoxide, carbon dioxide, nitrogen oxidesEXTINGUISHING MEDIAWater, Carbon dioxide, foam or dry powder.FIRE & EXPLOSION HAZARDSThis product is considered combustible and is a fire hazard. It supports combustion and decomposes under fire conditions to give off toxic materials. Do not pour, spill or store near heat, spark sources or open flame. Extinguishing Media: Use foam, dry chemical, CO2, or water.FIRE FIGHTING INSTRUCTIONSAs appropriate for surrounding materials/equipment. If electrical equipment is involved, the use of foam should be avoided. Use water spray to cool non-involved containers.Fire Fighting Protective Equipment:
Wear self-contained breathing apparatus with a full-face piece operated in the positive pressure demand mode and full protective clothing (Bunker Gear) when fighting fires.
VI. ACCIDENTAL RELEASE MEASURES Major Spills:For major spills call Chemtrec (800-424-9300).Spills, Leaks, or Releases:
Remove all sources of ignition. Ventilate area. Absorb spill with absorbent material such as sawdust, vermiculite or sand, and place in a closed container. In case of large spill, dike the area to prevent this material from entering water systems or sewers.
VII. HANDLING AND STORAGE
Avoid breathing aerosols, spray mists and heated vapors. Avoid prolonged or repeated skin contact. (See Section 8—Exposure Control for details).
Keep containers properly sealed when stored indoors, in a cool well-ventilated area. Keep contents away from moisture. Keep away form heat, sparks and open flame. Never use welding or cutting torch on or near any container (even empty) as an explosion can occur. Care should be taken to prevent moisture condensation in the container.
Avoid storage above 100 ̊F.
VIII. EXPOSURE CONTROLS / PERSONAL PROTECTION
Conditions of use, adequacy of engineering or other control measures, and actual exposures will dictate the need for specific protective devices at your workplace.
Work / Hygienic Practices:
Use good personal hygiene practices. Wash hands before eating, drinking, smoking, or using toilet facilities. Promptly remove soiled clothing and wash thoroughly before reuse. Shower after work, using plenty of soap and water. Open containers of food and beverages should be kept away from areas where the product is used or stored. Eating, drinking, smoking and application of cosmetics should be prohibited in areas where the product is being used.
Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below TLV(s). General ventilation is recommended. Additional local exhaust ventilation is recommended where vapors, mists, or aerosols may be released.
Wear protective eyeglasses or chemical safety goggles, per OSHA eye and face-protection regulations (29 CFR 1910.133). Contact lenses are not eye protection devices. Appropriate eye protection must be worn instead of, or in conjunction with contact lenses.
Wear chemical resistant gloves. Wear protective clothing to prevent skin contact. Keep exposed skin area to a minimum. Eye wash station and safety shower should be available.
If exposure can exceed the PEL/TLV, use only NIOSH/MSHA approved air purifying or supplied air respirator operated in a positive pressure mode per the NIOSH/OSHA occupational health guidelines for chemical hazards. If it is possible to generate significant levels of vapors or mists, a NIOSH approved or equivalent respirator is recommended.
IX. PHYSICAL AND CHEMICAL PROPERTIES
|COLOR||White (may be tinted)|
|ODOR||Slight Sweet Odor|
|BOILING POINT||310 - 385°F|
|EVAPORATION RATE||Slower than Ether|
|% VOLATILE VOLUME||69.1%|
|VAPOR DENSITY||Heavier than Air|
|VOC||<10 Grams/Liter EPA Method 24|
X. STABILITY AND REACTIVITY STABILITY:
Will not occur. DECOMPOSITION:By high heat or fire: Carbon Monoxide, Oxides of Nitrogen and various hydrocarbon fragments.INCOMPATIBILITYAvoid strong oxidizing agents, concentrated nitric and sulfuric acids, halogen, and molten sulfur.CONDITIONS TO AVOIDKeep away from heat, sparks, or flames.
XI. TOXICOLOGICAL INFORMATION Potential Health EffectsInhalation: Short-term inhalation toxicity is low. Breathing small amounts during normal handling is not likely to cause harmful effects. Breathing large amounts may be harmful. Symptoms are more likely seen at air concentrations exceeding the recommended exposure limits. Symptoms of exposure may include: Irritation (nose, throat, and respiratory tract), metallic taste in mouth, impaired coordination, confusion, CNS depression (dizziness, drowsiness, weakness, fatigue, nausea, headache, and unconsciousness).Skin Contact: Exposure causes skin irritation. Prolonged or repeated exposure may dry the skin. Symptoms may include redness, burning, drying and cracking. Skin absorption is possible, but harmful effects are not expected from this route of exposure under normal conditions of handling and use.Eye Contact: Exposure to liquid or vapor causes eye irritation. Symptoms may include stinging, tearing, and swelling. Ingestion: Single dose or oral toxicity is low. Swallowing small amounts during normal handling is not likely to cause harmful effects. Swallowing large amounts may be harmful.Symptoms may include: Gastrointestinal irritation (nausea, vomiting, and diarrhea) and possible liver damage. This material can enter the lungs during swallowing or vomiting and cause lung inflammation and/or damage.Medical Conditions Generally Aggravated by Exposure: May aggravate pre-existing respiratory and skin disorders. Chronic Effects: Prolonged or repeated skin contact may cause dryness, defatting, and dermatitis.Carcinogenicity: The ingredients of this product are not classified as carcinogenic by ACGIH or IARC, not regulated as carcinogens by OSHA, and not listed as carcinogens by NTP.Mutagenicity: There is no substantial evidence of mutagenic potential.
XII. ECOLOGICAL INFORMATION
No information available.
XIII. DISPOSAL CONSIDERATIONS
- This product has been tested to have a flash point below 140°F. If discarded in liquid form, this product should be treated as hazardous waste based on the characteristic of ignitability as defined under the federal RCRA regulations (40 CFR 261).
- For further, information contact your state or local solid waste agency or the United States Environmental Protection Agency’s RCRA hotline (1-800-434-9300 or 202-382-3000). Chemical waste, even small quantities should never be poured down drains, sewers or waterways. Empty containers should be decontaminated and either passed to an approved drum recycler or destroyed.
XIV. TRANSPORT INFORMATION
PRODUCT LABEL: EnergyMax Eco-SiliconeDOT: Roof Coating, Not RegulatedTransportation Emergency Telephone Number: 1-800-424-9300 CHEMTREC
XV. REGULATORY INFORMATION
- OSHA: Not Regulated
- TSCA: The material or its components are listed on the TSCA Chemical Substance Inventory and is in compliance with all applicable rules and orders. One or more of the components may be exempt from listing on the TSCA Inventory.
- SARA: This material does not contain any substances in the list of Toxic Chemicals subject to Section 313 of the Superfund Amendments and Reauthorization Act of 1986 (SARA Title III), in excess of the applicable de minimis concentrations as specified in Section 372.38 (a).
XVI. OHTER INFORMATION
- ACGIH - American Conference of Governmental Industrial Hygienist
- IARC - International Agency for Research on CancerMSHA - Mine Safety and Health Administration
- NIOSH - National Institute for Occupational Safety and Health
- NTP - National Toxicology Program
- OSHA - Occupational Safety and Health Administration