EnergyGuard Acrylic Clear Safety Data Sheet (SDS) SDS

Safety Data Sheet

I. IDENTIFICATION

  • EnergyGuard Acrylic Clear
  • Packaging: pails
  • CAS Number: 
  • Date Updated: Monday, June 11, 2018
  • EMERGENCY TELEPHONE NUMBER: 800-535-5053

COMPANY INFORMATION

II. HAZARDS(S) IDENTIFICATION

  • Effects of Overexposure:
  • Skin: May cause moderate skin irritation with repeated contact.
  • Eyes: Direct contact may cause irritation.
  • Inhalation: Spray mist in poorly ventilated areas can cause headache, nausea andirritation of the nose, throat, & lungs

III. COMPOSITION / INFORMATION ON INGREDIENTS

ComponentCAS NumberAmount of Weight
Water7732-18-550% Min
Polymer DispersionNonhazardous45% Max
Ammonia1336-21-61% Max
PreservativeMixture1% Max

IV. FIRST-AID MEASURES

  • Inhalation: Move subject to fresh air.
  • Eye Contact:  Flush eyes with water for 15 minutes. Consult a physician if irritation persists.
  • Skin Contact: Wash affected area with large amounts of soap and water.
  • Ingestion: If swallowed give two glasses of water to drink. Consult a physician. Never give anything by mouth to an unconscious person.

V. FIRE-FIGHTING MEASURES

  • Flash Point: Non-combustible
  • Flash Point: Non-combustible: Not applicable
  • LEL:  Not applicable
  • UEL:  Not applicable
  • Flammable Limits:  Not applicable
  • Extinguishing Media:  Water, carbon dioxide, foam or dry powder
  • Fire-Fighting Instructions:  No known unusual hazards in a fire situation.
  • Fire-Fighting Equipment:  Wear SCBA and full protective gear when entering a confined orenclosed space to protect from normal combustion products and/oroxygen deficiency.
  • Unusual Fire or Explosion Hazards:  None

VI. ACCIDENTAL RELEASE MEASURES

  • Spill / Leak Procedures:  Keep spectators away as the floor may be slippery. Use care to avoid falling. Keep spills out of municipal sewers and open bodies of water. Dike and contain spill with inert material such as dry sand or earth. Transfer liquid material to a suitable container for recovery or disposal. Scoop or shovel solid material into a suitable container for disposal.
  • Disposal:  Disposal should be in accordance with local, state, and federal regulations.

VII. HANDLING AND STORAGE

  • ​​Handling Precautions: Keep from Freezing.
  • Storage Requirements: Recommended storage range is 45–90°F. Keep container tightly closed.

VIII. EXPOSURE CONTROLS / PERSONAL PROTECTION

  • Ventilation: Mechanical local exhaust ventilation at point of contaminant release.
  • Respiratory Protection: Wear suitable respirator (MSHA/NIOSH approved or equivalent) where exposure limits are exceeded.
  • Protective Equipment: Impervious Gloves
  • Eye Protection: Chemical splash goggles (ANSI Z-87.1 or approved equivalent).

IX. PHYSICAL AND CHEMICAL PROPERTIES

  • Physical State: Liquid
  • Appearance and Odor: Milky white with slight odor 
  • Vapor Pressure: Greater than 1
  • Density (pounds per gallon): 8.5-8.9
  • Water Solubility: Dispersible
  • Boiling Point:  100°C (212°F)
  • Freezing Point:  0°C (32° F) 
  • Viscosity (cps): 1500-2500
  • % Volatile by Volume: 58-62%
  • Evaporation Rate (n-BuAc=1): Less than 1
  • Volatile Organic Compounds: Less than 35 g/Liter

X. STABILITY AND REACTIVITY

  • Stability: Stable
  • Incompatibility: No known incompatible materials are known for this product
  • Hazardous Polymerization: Will not polymerize
  • Hazardous Decomposition Products: Acrylic monomers

XI. TOXICOLOGICAL INFORMATION

No information available.

XII. ECOLOGICAL INFORMATION

No information available.

XIII. DISPOSAL CONSIDERATIONS

  • Disposal: Treat or dispose of waste material in accordance with all local, state, and federal requirements. 

XIV. TRANSPORT INFORMATION

  • Product Name:  EnergyGuard Acrylic Clear Safety Data Sheet (SDS)
  • Shipping Name:  N/A
  • Hazard Class:  Non–hazardous

XV. REGULATORY INFORMATION

  • EPA Regulations:  All components of this product are believed to be in compliance with the inventory listing requirements of the US Toxic Substances Control Act (TSCA) Chemical Substances Inventory. 

XVI. OTHER INFORMATION

The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.